Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to solve the problem of water leaking from the footwell of the Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Body

Finding water inside our Citroen C3 Picasso is certainly very unpleasant, especially if we cannot understand what is causing the problem. This video suggests that the reason we hear the sound of water splashing while driving may be caused by clogged drainage holes, damaged seals, or even a faulty air conditioning system. The first thing to do is to remove the grates at the base of the windshield, after removing the wipers. From here, we can see that the drainage holes are clogged with leaves and debris that have accumulated over time, creating a sludge that has completely blocked the drains: we need to clean them out and put them back in place, and the problem will be solved.

Posted on 4 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Fix the Electric Power Steering Problem on Citroen C3 Picasso
How to Fix the Electric Power Steering Problem on Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) If the steering suddenly becomes stiff and the red steering wheel warning light illuminates on the dashboard, it indicates a problem with the electri…
How to Replace the Water Pump on a Citroen C3 Picasso 1.4 VTi
How to Replace the Water Pump on a Citroen C3 Picasso 1.4 VTi
Citroen C3 Picasso (2008-2017 / MK 1) This guide provides the main instructions for removing and replacing the water pump on a Citroen C3 Picasso 1.4 VTi. First, lift the vehicle and remo…
Where is the OBD port located in the Citroen C3 Picasso?
Where is the OBD port located in the Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) If you don't know where the OBD port of your Citroen C3 Picasso is located, then all you have to do is read the following guide and follow the few si…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos