Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Problems with the power steering of a Citroen Berlingo, caused by corrosion of the maxi fuses.

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this video we can see how to repair a problem that occurred with the power steering of the Citroen Berlingo. In fact, the display warns us with a "Stop" message and the power steering had stopped working.

Using an OBDII reader, the YouTuber found insufficient voltage to the power supply system, and when he opened the hood and the fuse box located on the positive pole of the battery, most of them showed a very low power, probably due to the obvious corrosion that the entire plate showed.

The main culprit was an 80 Amp fuse that was only releasing 6 amps; while waiting to replace it, the YouTuber made a small wiring.


Posted on 17 June 2025 by ScegliAuto


Related tutorials

Location of the power steering fluid reservoir of the 2005 Citroen Berlingo.
Location of the power steering fluid reservoir of the 2005 Citroen Berlingo.
Citroen Berlingo (1996-2013 / MK 1) In this video we see where the power steering fluid reservoir of the Citroen Berlingo is located: it is positioned on the front side of the hood, in …
Where Are the Fuses on a Citroën Berlingo?
Where Are the Fuses on a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) The fuses on a Citroën Berlingo are housed within designated fuse boxes installed in the vehicle: this model has two fuse boxes. The first is located…
Where are the Fuses on the Citroën Berlingo?
Where are the Fuses on the Citroën Berlingo?
Citroen Berlingo (1996-2013 / MK 1) The fuses on the Citroën Berlingo are located inside the designated fuse boxes installed within the vehicle. In this model, the first box is position…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos