Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Citroen C4 Picasso 1

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

See other generations:
Video tutorial

Today we will explain how to replace a car battery on your own, specifically we will see how to replace the battery of a Citroen C4 Picasso 1 diesel model. To replace the battery, we need to open the front hood and locate the position of the battery, which in our case is on the right side of the engine.

Disconnect the positive terminal block by pulling it upwards and open the plastic guide of the positive terminal cable to remove the cable. Using a small flat-head screwdriver, move the support tab to detach it from the battery box. Remove the plastic cover of the battery and with a 10 socket wrench, unscrew the nuts on the support plate to remove the battery.

After removing the support plate, pull upwards on the negative terminal block to disconnect it and remove the battery. Before installing the new battery, scrape off the layer of white oxide that has accumulated on the terminals using sandpaper.

Then insert the new battery and connect the negative terminal block, immediately after using a 10 wrench, tighten the nuts on the support plate to prevent the battery from moving during vehicle use. Connect the positive terminal to the battery and mount the plastic cover.


Posted on 16 August 2025 by ScegliAuto


Related tutorials

Citroen C4 Picasso (2006-2013 / MK 1) To replace the battery of the Citroën C4 Grand Picasso, access the engine bay and move the piece positioned above the battery, which has a red plasti…
Citroen C4 Picasso (2013-2022 / MK 2) To replace the remote battery for the Citroën C4 Picasso, use a thin object to pry open the back of the device, detaching the cover at the rear. Unde…
Citroen C4 Picasso (2013-2022 / MK 2) To replace the battery of the Citroen C4 Picasso remote, follow this guide which is also valid for all recent Citroen models. On the top of the remot…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos