Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to recalibrate and adjust the active suspensions of the Citroen C5

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Checks and maintenance

Below we will see the instructions that will allow us to carry out the recalibration and adjustment of the active suspensions of the Citroen C5. First of all, we get on board the vehicle and start the engine; from the on-board computer menu, it is possible to choose the various suspension adjustments, thus changing the vehicle's setup. By connecting a specific diagnostic tool, it will be possible to carry out the recalibration of the active suspensions; it may be useful to adjust the rear torsion bars to restore the setup, following the video tutorial to the end!

Posted on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Suspension Height on a Citroen C5
How to Adjust the Suspension Height on a Citroen C5
Citroen C5 (2000-2008 / DC, MK 1) Here are the steps to adjust the suspension height on your Citroen C5. The steps are very simple. First, start the car. Inside the cabin, near the ha…
How to Reprogram the Suspensions on a Citroen C4 Second Series?
How to Reprogram the Suspensions on a Citroen C4 Second Series?
Citroen C5 (2008-2017 / MK 2, RD, X7) The active and hydraulic suspension of the Citroen C5 second series, as seen in the video, is electronically programmable. Essentially, with this pro…
How to Replace the Hydraulic Suspension Pump on a Citroën C5?
How to Replace the Hydraulic Suspension Pump on a Citroën C5?
Citroen C5 (2000-2008 / DC, MK 1) To replace the hydraulic suspension pump on a Citroën C5, loosen the screws that secure the front bumper to its housing: once these screws are loosen…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos