Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reprogram the Suspensions on a Citroen C4 Second Series?

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Suspension system

The active and hydraulic suspension of the Citroen C5 second series, as seen in the video, is electronically programmable. Essentially, with this procedure, you set the stiffness and adjust it based on how you intend to use the vehicle. To do this, turn on the instrument panel and use the buttons on the steering wheel; you will see the Suspension option and various selectable options appear on the onboard computer. Usually, this is accompanied by the need to connect external programming equipment for setting the rear torsion bar, achieving even better results.

Posted on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Program the TPMS Sensor on a Citroen C5 MK2
How to Program the TPMS Sensor on a Citroen C5 MK2
Citroen C5 (2008-2017 / MK 2, RD, X7) In this video tutorial, we will see how to program the TPMS sensor on the second series Citroen C5, as well as on most vehicles; what you need is the…
How to recalibrate and adjust the active suspensions of the Citroen C5
How to recalibrate and adjust the active suspensions of the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Below we will see the instructions that will allow us to carry out the recalibration and adjustment of the active suspensions of the Citroen C5. Firs…
How to Replace the Hydraulic Suspension Pump on a Citroën C5?
How to Replace the Hydraulic Suspension Pump on a Citroën C5?
Citroen C5 (2000-2008 / DC, MK 1) To replace the hydraulic suspension pump on a Citroën C5, loosen the screws that secure the front bumper to its housing: once these screws are loosen…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos