Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : How to remove the engine air filter on a Citroen Xsara Picasso

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Air filter
Operation: How to remove the engine air filter on a Citroen Xsara Picasso

Let's see how to remove the engine air filter on a Citroen Xsara Picasso: we open the car door, pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same with the auction. We remove the suction pipe, open the ventilation kit (unscrew the tightening screws), uncover the filter box panel and extract the worn air filter. We insert a new filter in the dedicated housing (making it adhere well around the walls). Finally we reassemble the panel of the air box and tighten the screws. We close the front hood after maintenance.


Posted on 6 November 2023 by ScegliAuto



Replacement of the radiator on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) When you want to replace the engine radiator of a Citroen Xsara Picasso you must start by removing the engine air filter box with its inlet and outle
How to replace the engine air filter on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) How to change the engine air filter on Citroen C4 Picasso? Let's see how to proceed: open the car door, pull up the engine compartment opening lever
How to remove the citroen Xsara Picasso cabin air filter
Citroen Xsara Picasso (1999-2012 / MK 1) How to replace the cabin pollen filter on the Xsara Picasso? We see in this video how to perform the disassembly: lift the engine hood, remove with a

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos