Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When the fan only works at level 4, the fault lies with the resistor.

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
Video tutorial

As we can see in this video, when the fan only works at maximum speed, it is the classic symptom of a burned resistor. In fact, this component is responsible for reducing the voltage that reaches the fan motor, in order to make it spin at lower speeds.

If one or more of its internal resistors burn out, the corresponding speeds stop working, while the maximum speed bypasses the resistor and sends full voltage to the motor. It can be easily found on E-Bay with the code 145383755524 at a price of 12.09 euros, with free delivery.

It is located in the right footwell in an accessible position.


Posted on 21 November 2025 by ScegliAuto


Related tutorials

How to change the fan resistor of a Citroen Berlingo
How to change the fan resistor of a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this video, we see how to change the fan resistor of a Citroen Berlingo: the fan only works at maximum speed, so it is necessary to change the res…
Replacement of the fan resistors on Citroen Berlingo MK2
Replacement of the fan resistors on Citroen Berlingo MK2
Citroen Berlingo (2008-2018 / MK 2) In this video, we will see what the problem is with the cabin fan that only works at maximum speed on a Citroen Berlingo (or Peugeot Partner); if the…
How to Replace the Cabin Fan Resistor on a Citroën Berlingo
How to Replace the Cabin Fan Resistor on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) The cabin fan on a Citroën Berlingo is located inside the cabin, specifically behind the left dashboard. The cause of the fan not working is the fail…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos