Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the elastic belt without a tensioner on the Citroen Jumper.

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: V-belt

See other generations:
Video tutorial

On the Citroen Jumper, the installation with an elastic belt is done without a tensioner. With the engine off and the vehicle secured, check the path of the belt on the pulleys as shown, then pre-position the belt starting from the deepest pulley, leaving the one for the final fitting free.

Apply the dedicated tool (or the guide ring indicated by the kit) on the chosen pulley, keeping the belt tight against the grooves and centered; by manually rotating the flywheel/alternator in the correct direction, the belt will slide and settle onto the last pulley.

At the end, check that each groove is centered, with no twists, and perform a manual check to confirm alignment.

Finally, remove the installation tool shown in the video and briefly start the engine to check for smooth passage.


Posted on 11 December 2025 by ScegliAuto


Related tutorials

How and When to Replace the Timing Belt of the Citroen Jumper 2.2 BlueHDi
How and When to Replace the Timing Belt of the Citroen Jumper 2.2 BlueHDi
Citroen Jumper (2014-2024 / MK 3) The main information provided in this guide will show you how and when to carry out the removal and replacement of the timing belt of the Citroen Jum…
How to reset the service light on the Citroen Jumper 2.2 HDI
How to reset the service light on the Citroen Jumper 2.2 HDI
Citroen Jumper (2006-2014 / MK 2) These short and simple steps will illustrate the process of resetting the service light for the regular maintenance of the engine oil change of the C…
How to reset the service indicator on the 2017 Citroen Jumper
How to reset the service indicator on the 2017 Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) If you want to manually reset the service light on your 2017 Citroen Jumper, you must follow the procedure described in this new guide. First of all,…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos