Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in a Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Battery

Today, I will explain how to independently replace the battery in a Citroen C4 Picasso model 1. The vehicle's battery is located under the front bonnet next to the air filter. Open the bonnet by pulling the release lever, and unscrew the screws on the cover of the air filter box. After removing the box, disconnect the connector from the air duct and unscrew the screw on the clamp to remove it. Disconnect the negative terminal from the battery and remove the plastic cover. Disconnect the positive terminal and unscrew the nut on the battery securing bar. Extract the battery from its location and insert the new one. Connect the positive and negative terminals, refit the securing bar and the battery cover. Refit the air filter box and secure it with screws. Refit the air duct and reconnect the connector. Close the bonnet and start the vehicle.

Posted on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 Picasso (2006-2013 / MK 1) Today's guide will show you the main steps on how to remove and replace the battery on a Citroen C4 Grand Picasso and C4 Picasso. First, open the bon…
Citroen C4 Picasso (2006-2013 / MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the battery of the Citroen C4 Picasso 1.6 HDi. First of all,…
Citroen C4 Picasso (2006-2013 / MK 1) Is the battery of the Citroen C4 Grand Picasso damaged? Here’s how to replace it. Open the car door and release the front bonnet; lift the bonnet. Re…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos