Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cable on a Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Clutch

In this guide, you will discover the main instructions on how to disassemble and replace the clutch cable on a Citroen Berlingo. First, open the driver's side front door and disconnect the clutch cable from the pedal, along with its sheath; from the engine compartment, disconnect the cable at the top of the gearbox, removing the battery and battery tray to access it, as shown in the video. At this point, install the new sheathed clutch cable, adjusting it from the appropriate adjuster, following the video tutorial to the end!

Posted on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Cable on a Citroen Berlingo
How to Replace the Clutch Cable on a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) How to remove and replace the clutch cable on a Citroen Berlingo? Lift the bonnet and secure it, then, using a socket spanner, unscrew the locking bo…
How to change the clutch cable of a Citroen Berlingo
How to change the clutch cable of a Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) To replace the clutch cable of a Citroen Berlingo car, you will need the following accessories: socket set with ratchet wrenches, pliers, screwdriver…
What is the self-adjusting clutch cable of the Citroen Berlingo made of?
What is the self-adjusting clutch cable of the Citroen Berlingo made of?
Citroen Berlingo (2018-2026 / MK 3) In this video we can see how the self-adjusting clutch cable of the Citroen Berlingo is made: inside the sheath, the cable is not a simple steel wire…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos