Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Citroen C5

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Door trim panel

How do you remove the door panel on a Citroen C5? Let’s see how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine compartment. Begin disassembly: use a trim tool to remove the plastic cover of the handle, then unscrew the screws inside with a screwdriver. Once all screws are removed, use the trim tool to take out all the plastic clips that secure the door. Detach the door panel by hand, disconnect any power connectors. Do not lose any of the snap clips located behind the previously removed plastic panel.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel on Citroen C5
Removing the Door Panel on Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Remove the door panel on a Citroen C5 if it is damaged or if you need to repair the door from the inside. Remove all the plastic cover pieces above t…
Removing the Door Panel on a Citroen C5
Removing the Door Panel on a Citroen C5
Citroen C5 (2000-2008 / DC, MK 1) .. Removing the door panel on a Citroen C5? Here’s how to take it off from the top of the door and how t.. …
How to Remove the Door Panel on a Citroen C5
How to Remove the Door Panel on a Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Perform the removal of the door panel (right side) on a Citroen C5: disconnect the battery terminals located in the engine bay, use a screwdriver to …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos