Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram for the Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

The video here shows the layout of all the fuses present in the Citroen Berlingo. These are divided into three fuse boxes located inside the cabin, in the engine compartment, and in the boot.

To extract and inspect them, you need to use the appropriate pliers, available at any spare parts shop or DIY store. It is often included in the car's basic kit. The arrangement of the fuses may vary slightly depending on the country where the Berlingo was purchased or its year of manufacture, so it is always recommended to consult the owner's manual as well.


Posted on 2 June 2026 by ScegliAuto


Related tutorials

How to access the internal fuse box of the Citroen Berlingo
How to access the internal fuse box of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Below we will discover the positioning of the internal fuse box of the Citroen Berlingo, finding the diagram and the chart. First, we open the front …
Location of the Fuse Boxes in the Citroen Berlingo
Location of the Fuse Boxes in the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) .. brief guide the placement and where to find the fuse diagram for the Citroen Berlingo. First, locate the internal fuse box; it is situated on the driver's.. …
Diagram and positioning of the fuses of the Citroen Berlingo
Diagram and positioning of the fuses of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) This short guide will illustrate the layout and positioning of the fuse boxes in the Citroen Berlingo. First, let's open the vehicle's hood and begin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos