Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Citroen C4

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Door trim panel

How to remove the door panel on a Citroen C4? Don’t worry, here’s how to proceed. Before starting the disassembly work, disconnect the battery terminals located in the engine compartment. Use a lever to remove the plastic cover of the handle, then unscrew the internal door handle with a screwdriver and remove the switch panel. Once all screws are removed, use the lever to detach all the plastic clips that hold the door. Pull the door panel away with your hands, disconnect any power connectors. Be careful not to lose any of the clips behind the plastic panel that was removed first.

Updated on 11 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Front Door Panel on a Citroen C4
How to Remove the Front Door Panel on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Before you start, open the front door of your Citroen C4. Using a thin yet sturdy tool, begin by removing the inserts from the door panel. Next, unsc…
How to Remove the Front Door Panel on a Citroen C4
How to Remove the Front Door Panel on a Citroen C4
Citroen C4 (2004-2010 / MK 1) This guide provides instructions for removing the front door panel on a Citroen C4. First, open the front door of the vehicle and unscrew all the fas…
How to Remove and Replace the Door Panel on a Citroen C4?
How to Remove and Replace the Door Panel on a Citroen C4?
Citroen C4 (2004-2010 / MK 1) This video tutorial explains and shows how to remove and replace the front door panel (passenger side) on a Citroen C4. First, unscrew and remove all…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos