Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Headlight Bulb on a Citroen C3

Model: Citroen C3 Pluriel - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

See other generations:
Video tutorial

To replace a rear headlight bulb on a second-generation Citroen C3, switch off the lights, open the boot, and locate the fastening of the affected light unit. Remove the nut or locking screw accessible from the inside of the boot, then grasp the light and gently pull it outwards, taking care with the alignment pins.

Disconnect the electrical connector and release the rear bulb holder by acting on the relevant retaining tabs. Locate the faulty bulb, press it slightly, and twist to remove it from the bulb holder.

Insert a new bulb of the same type and reassemble the bulb holder. Reconnect the electrical plug, reposition the light unit into the bodywork, and tighten the fastening.

Before closing the boot, switch on the lights and check for correct operation.


Posted on 31 August 2026 by ScegliAuto


Related tutorials

Citroen C3 (2009-2016 / SC) Do you want to replace the bulb of the rear light? Let’s see how to remove the rear light of the Citroen C3. Lift the boot lid, then remove the fabri…
Citroen C3 (2002-2009 / FC, FN) Before you can begin, open the rear hatch of the boot on your Citroen C3. Start by unscrewing and removing the screws that secure the rear light to t…
Citroen C3 (2009-2016 / SC) Replacing the rear headlight bulb of the Citroen C3 is a simple and quick operation to be carried out independently. To perform the replacement of th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos