Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Inner Door Panel of a Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Door trim panel

Removing the inner door panel of a Xsara Picasso? Here’s how to do it. Detach the cover of the handle and unscrew the screws inside. Remove the plastic cover near the window and take off the speaker cover. Unscrew the screws on the sides of the speaker and remove it. Unscrew the remaining screws on the door panel and detach the retaining clips. Pull the panel away with your hands and disconnect it from the door (unplug the power wiring and the opening cable). Perform the desired maintenance inside the door. Refit the same panel or a new one.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Door Panel on Citroen Xsara Picasso
Replacing Door Panel on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Remove the door panel on a Xsara Picasso. Disconnect the battery terminals located in the engine bay. Remove the plastic from the door panel area (sp…
Removing the Front Door Panel from the Citroen Xsara Picasso
Removing the Front Door Panel from the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Let's see the instructions that will allow us to remove and replace the front door panel of the Citroen Xsara Picasso in simple steps. First, open th…
Removing the Door Panel from a Citroen Xsara Picasso
Removing the Door Panel from a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video tutorial, you will learn how to remove the door panel from a Citroen Xsara Picasso by following these simple steps. First, open the fro…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos