Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to remove the door cylinder on C3

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Lock
Operation: How to remove the door cylinder on C3

How to remove the damaged cylinder of a Citroen C3? Let's see how it is removed from inside the door. We open the car door, remove the plastic covering on the side of the external handle (we pry the side of the same). Unscrew the fastening screws on the side of the door as shown in the video, remove the door cover panel to access the cylinder. We remove the cylinder from inside the handle. We hook the handle and fix the plastic cover latch (we screw the clamping screws). We test the correct functioning of the lock with the ignition key.


Posted on 25 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2016-2023 - How much does it cost to replace the lock on my Citroen C3? Read Answer
    • C3 2002-2009 - Cost of changing door lock Citroen C3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos