Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator on a Citroen C1

Model: Citroen C1 MK 2 - Years 2014-2022
Part: Radiator

Lift the car to access the area beneath the radiator. Disconnect the flexible hose leading to the heat exchanger by removing its clip, and allow the coolant to drain as there are no valves or taps for this purpose. Unscrew the upper screws securing the front bumper, as well as the screws securing it from underneath. Remove the bumper by pulling it a little at a time from each part, taking care not to break the clips. At this point, remove the lower support of the radiator with the fan, disconnect the heat exchanger, and extract it from below.

Updated on 5 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Air Conditioning Radiator on a Citroen C1
How to Replace the Air Conditioning Radiator on a Citroen C1
Citroen C1 (2005-2014 / MK 1) If the air coming from the vents is not cold enough when the air conditioning is activated, it is likely that there is low gas in the circuit due to …
Replacing and Topping Up Radiator Fluid on Citroen C1
Replacing and Topping Up Radiator Fluid on Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video tutorial, learn how to replace and top up the radiator fluid on a first-generation Citroen C1 in simple steps. First, lift the vehicle …
Where Are the Fuses on the Citroën C1?
Where Are the Fuses on the Citroën C1?
Citroen C1 (2005-2014 / MK 1) The fuses on the Citroën C1 are contained within dedicated fuse boxes installed in the vehicle: on this model, you can find three fuse boxes. The fir…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos