Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing and Topping Up Radiator Fluid on Citroen C1

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Antifreeze coolant

See other generations:
Video tutorial

In this video tutorial, learn how to replace and top up the radiator fluid on a first-generation Citroen C1 in simple steps. First, lift the vehicle and unscrew the coolant drain bolt, located next to the pulleys; then let all the old fluid drain out before refitting the bolt.

At this point, insert the new coolant into the designated filler tank found in the engine bay and fill it to the maximum level; the video also shows an additive being added along with the coolant.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Replacing the Brake Fluid on the Citroen C1 - Peugeot 107
Replacing the Brake Fluid on the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) In today's video, learn how to replace the brake fluid on the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, lift the vehicle and rem…
How to Top Up the Antifreeze in a Citroën C1?
How to Top Up the Antifreeze in a Citroën C1?
Citroen C1 (2005-2014 / MK 1) To top up the antifreeze in a Citroën C1, open the bonnet to access the components inside the engine bay. In the lower right part, you will find a ye…
Replacing the Radiator on a Citroen C1
Citroen C1 (2014-2022 / MK 2) Lift the car to access the area beneath the radiator. Disconnect the flexible hose leading to the heat exchanger by removing its clip, and allow the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos