Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C1
    4. : How to replace the Citroen C1 air conditioning radiator

Citroen C1 - Video tutorial

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Radiator
Operation: How to replace the Citroen C1 air conditioning radiator

If it happens that even though the air conditioning system is activated, the air that comes out of the ventilation vents is not cold enough, then it is likely that there is little gas in the circuit due to any leaks due to the breakage of the air conditioning radiator; this radiator is located right in front of the engine coolant and in order to be able to disassemble it, the front bumper must necessarily be removed; however, before proceeding with the disassembly, it is suggested to recover the residual gas present in the system; once the bumper has been removed, it is easy to disconnect the pipes from the radiator and remove the relative fixing pins to proceed with the replacement.


Posted on 16 September 2023 by ScegliAuto



Where are the fuses located in the Citroën C1?
Citroen C1 (2005-2014 / MK 1) The fuses of the Citroën C1 are contained within the appropriate fuse boxes installed on the vehicle: on this car model, it is possible to identify t
Radiator replacement on Citroen C1
Citroen C1 (2014-2022 / MK 2) Raise the car so that you can work in the area under the radiator. Disconnect the flexible pipe that reaches the exchanger itself by removing the cla
Citroen C1 radiator fluid replacement and top up
Citroen C1 (2005-2014 / MK 1) Let's see in this video tutorial how to replace and top up the radiator fluid on a Citroen C1 first series, in simple steps. First we lift the car an

Other guides that may interest you

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos