Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Shift Cable on the Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Transmission

Video tutorial

This guide shows how to replace the gear selection cable on the Citroen Xsara Picasso. To perform this operation, lift and secure the vehicle.

From underneath, detach the engine protection cover held in place by several bolts and the heat shield of the exhaust. Once the gear cable terminal is located, unscrew the termination.

Next, move into the cabin to remove the lower part of the dashboard to access the other end of the cable and detach it. After fitting the new gear cable, adjust the travel from the engine bay; by removing the air filter, you can access the adjustment knob.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to replace the gear shift knob of the Citroen Xsara Picasso
How to replace the gear shift knob of the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Following these brief and simple steps, we will see how to disassemble and replace the gear shift knob of the Citroen Xsara Picasso. First, we get in…
Replacing the gear lever gaiter on the Citroen Xsara Picasso
Replacing the gear lever gaiter on the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Today we will look at the main instructions for removing and replacing the gear lever gaiter on the Citroen Xsara Picasso. First, get inside the vehi…
Guide to Replacing the Clutch Cable on the Citroen Xsara Picasso
Guide to Replacing the Clutch Cable on the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) This guide shows you how to remove and replace the clutch cable on the Citroen Xsara Picasso. First, open the bonnet and disconnect the clutch cable …

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos