Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Front bumper

With the handbrake engaged, lift the bonnet and secure it. Undo the upper 10 mm bolts of the bumper and remove the round plastic clips clearly shown in the video. Also remove the plastic clips in the two wheel arches. Now get underneath the bumper and undo the other 10 mm bolts, and you're done. Work slowly as you pull the bumper from its housing, gently tugging at all parts to ensure it comes off evenly. Now that the bumper is removed, you can more easily access various parts of the vehicle, such as the front headlights.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Bumper on a Citroen C1
How to Replace the Rear Bumper on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Before you can start, open the tailgate of your Citroen C1. Begin by unscrewing and removing the fixing screws of the bumper located around the perim…
How do you remove the front bumper of the Citroën C1?
How do you remove the front bumper of the Citroën C1?
Citroen C1 (2005-2014 / MK 1) To remove the front bumper of the Citroën C1, you will need to open the hood in order to locate the screws that secure the bumper from the top. Once …
How to Remove the Front Bumper of a Citroën C1?
How to Remove the Front Bumper of a Citroën C1?
Citroen C1 (2005-2014 / MK 1) To remove the front bumper of a Citroën C1, open the bonnet to access the screws located at the top of the bumper. Once these screws are completely l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos