Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fog Light Bulb on Citroen C4

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Fog lights

Do you want to remove the bulb from the front fog light? Here’s how to take out the bulb after removing the engine cover panel. Lift the car, unscrew all the screws that secure the engine cover panel (screws on the sides of the panel). Disconnect the bulb with the holder from inside the fog light. Fit the new bulb into the fog light (ensure it matches in size and voltage). After fitting the bulb into the fog light, screw the securing screws back under the cover panel. Turn on the ignition and check the operation of the fog lights.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the fog light bulb of the Citroën C4?
How do you replace the fog light bulb of the Citroën C4?
Citroen C4 (2010-2018 / MK 2) In order to replace the fog light bulb of the Citroën C4, you need to use an object to pry off the trim panel around the corresponding fog light. At …
How to Replace the Front Headlamp Bulb on a Citroën C4
How to Replace the Front Headlamp Bulb on a Citroën C4
Citroen C4 (2010-2018 / MK 2) To replace the front headlamp bulb on a Citroën C4, open the bonnet to access the internal part of the corresponding headlamp. Disconnect the circula…
How to Replace the Brake Light Bulb of a Citroen C4 Rear Headlamp
How to Replace the Brake Light Bulb of a Citroen C4 Rear Headlamp
Citroen C4 (2004-2010 / MK 1) Before you begin, open the boot of your Citroen C4. Start by unclipping and moving the internal side cover of the boot. Next, unscrew and remove the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos