Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Battery

In this video tutorial we can see how it is possible to replace the battery on Citroen C4 Picasso, following a few simple steps: the first thing you need to do is to turn off the engine and apply the handbrake. Open the hood and secure it with a special rod. The battery is located to the right of the engine compartment. You will need to pull up on the retaining clip on the positive terminal to disconnect it. Take the tab on the cover and pull it up to remove the battery cover. Lift the retaining clip on the negative terminal to disconnect it. Use a 10mm socket wrench to unscrew the battery retaining plate. At this point you can remove the old battery and replace it with the new one.


Posted on 2 May 2024 by ScegliAuto



Guide to replacing the battery of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Today's guide will show us the main steps on how to dismantle and replace the battery of the Citroen C4 Grand Picasso and the C4 Picasso. First, we o
How to remove the battery of a Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Before starting, we will have to open the front hood of our Citroen C4 Picasso. Let's start by moving the cover of the positive pole connected to the
How to replace the battery of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) The following steps will show us how to disassemble and replace the battery of the Citroen C4 Picasso. First, we open the car's engine hood and start

Other guides that may interest you

    Frequently Asked Questions

    • C4 Picasso 2013-2022 - What does Active Energy Saving Mode mean on Citroen C4 Picasso? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos