Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Camshaft Oil Seal

Model: Citroen C4 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine

See other generations:
Video tutorial

The gasket set for the engine includes all the head gaskets and the oil seals for the camshafts that must be inserted before installing the respective pulleys (tighten the fixing bolts using the appropriate torque wrench); then align the timing marks by rotating the crankshaft pulley, insert the fixing pins, and install the timing belt.

Before starting the engine, rotate the crankshaft pulley again to complete one cycle (two turns of the pulley) and recheck the alignment of the timing marks.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacing Front Bulb on Citroen C4
Replacing Front Bulb on Citroen C4
Citroen C4 (2010-2018 / MK 2) Replacing the front bulbs on a Citroen C4 is extremely simple. Open the bonnet and insert the support rod. Remove the round rear cover (inside the bo…
Replacing the Door Lock on Front Door of Citroen C4
Replacing the Door Lock on Front Door of Citroen C4
Citroen C4 (2004-2010 / MK 1) Replacing the door lock on your car is not a complicated task. First, detach the external plastic handle by prying it off with a flat screwdriver or …
Replacing Rear Bulb on Citroen C4
Replacing Rear Bulb on Citroen C4
Citroen C4 (2010-2018 / MK 2) Replace the blown bulbs in the rear headlight of a Citroen C4. Open the rear boot and lift it. Remove the cloth cover to access the rear headlight. U…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos