Do it yourself
Frequently asked questions about cars and motorcycles

Rear Brake Disc and Pad Replacement

Model: Citroen C8 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake rotors

Video tutorial

Once the vehicle is lifted on a hydraulic ramp, remove the rear wheel and the fixing bolts of the brake disc from the hub; proceed to remove the fixing bolts of the brake caliper from its support; then remove the caliper and subsequently the support; move on to removing the disc from the hub, clean the hub thoroughly with a wire brush, apply grease to prevent rust formation, and install the new disc after cleaning off the protective oil, securing it with the respective bolt; then install the caliper support, the new pads, and the caliper itself after retracting the piston with the appropriate tool.

Pump the brake pedal and pay attention during the first braking.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Citroen C8 (2002-2014 / MK 1) Lift the vehicle on a hydraulic lift and remove the front wheel. Unscrew the retaining bolts of the brake caliper from its support. Before removing t…
Citroen C8 (2002-2014 / MK 1) Replacing the timing belt requires a basic understanding of general mechanics, as an assembly error could compromise the engine. It is advisable to l…
Citroen C8 (2002-2014 / MK 1) The water pump is driven by the timing belt, so its replacement requires the removal of the belt itself: align the timing marks before removing the b…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos