Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Climate Control Bulbs on the Citroen Berlingo 1

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Instrument panel light

Let’s see in this guide how to dismantle and replace the bulbs for the climate control switches on the dashboard of the first series Citroen Berlingo. First, get into the vehicle and start by removing the standard radio using the appropriate extraction tools; then disconnect the electrical connectors at the back. At this point, use a small pliers to remove the bulb holders along with the climate control bulbs; simply replace the old bulbs with new ones, applying the reverse procedure for reassembly!

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Centre Panel of the Citroën Berlingo Dashboard?
How to Remove the Centre Panel of the Citroën Berlingo Dashboard?
Citroen Berlingo (2008-2018 / MK 2) To replace the centre panel with the climate control buttons on the Citroën Berlingo, disconnect the part located at the base of the leather gear kno…
Replacing Front Headlight Bulbs on Citroen Berlingo
Replacing Front Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replace the blown bulbs in the front lights of your Citroen Berlingo. Start by opening the front bonnet and removing the plastic cover (if fitted beh…
How to Replace the Climate Control Bulbs in the Citroen Berlingo
How to Replace the Climate Control Bulbs in the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Today's steps will show you the procedure for removing and replacing the bulbs of the climate control in the Citroen Berlingo, as well as in the Peug…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos