Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to disassemble a wheel arch in the Citroen C3?

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Bodywork
Operation: How to disassemble a wheel arch in the Citroen C3?

In this tutorial we can see how to remove a wheel arch in Citroen C3, a very simple and fast operation. First of all, open the bonnet, then unscrew the four screws located on the upper edge of the grille. We then extract the plastic rivets located inside the wheel arch, helping ourselves for example with a flat-headed screwdriver, then unscrew the indicated bolts with a 10mm socket wrench and disengage the mirror base panel. At this point we can remove the last bolts, including those fixing the headlight, and separate the wheel arch from the frame.


Posted on 9 December 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2009-2016 - How much does it cost to replace the airbumps on a Citroen C3? Read Answer
    • C3 2009-2016 - How much does it cost to replace the sunroof of the Citroen C3? Read Answer
    • C3 2009-2016 - Where are the Citroen C3's airbag impact sensors located? Read Answer
    • C3 2016-2023 - How much does it cost to repair the Citroen C3 Pluriel soft top? Read Answer
    • C3 2002-2009 - Where does the front hood of the Citroen C3 open from? Read Answer
    • C3 2009-2016 - How to open the hood on Citroen C3? Read Answer
    • C3 2002-2009 - Where is the color code Citroen C3 pluriel? Read Answer

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos