Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Battery

The battery of the Citroen Xsara Picasso is located under the driver's seat. To remove it, start by taking off the headrest by pressing the tab and pulling it upwards. Move the seat forward, remove the plastic cover at the back of the rail, unscrew the left rear bolt of the rail and the two rear bolts on the right. Slide the seat forward and lift it towards the windscreen to access the battery. Slightly turn the plastic protective screw, disconnect the negative terminal first and then the positive by lifting the clips. Unscrew the nuts of the upper bracket and remove the battery. Finally, take out the old battery, place the new battery, refit the upper bracket, screw the nuts back on, and reverse the disassembly process.

Updated on 2 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the Battery in a Citroen Xsara Picasso
Replacing the Battery in a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Replace the vehicle's power battery? Remove the power battery in a Citroen Xsara Picasso. Open the car door and lift the driver's seat; the battery i…
Battery Replacement on the Citroen Xsara Picasso 2.0 HDI
Battery Replacement on the Citroen Xsara Picasso 2.0 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) Below are the instructions to remove and replace the battery of the Citroen Xsara Picasso 2.0 HDI. First, open the bonnet of your car and start unscr…
Replacing the Battery on a Citroen Xsara Picasso
Replacing the Battery on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Do you want to remove the battery from the Citroen Xsara Picasso? Here’s how to take out the battery from the Citroen. Open the car door and lift the…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos