Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Citroen Berlingo Mk2

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Battery

This guide shows how to replace the battery of the Citroen Berlingo Mk2. The first step is to open the bonnet and remove the positive connector from the battery. Remove the two 10 mm bolts that hold the main wiring cables, and with an 8 mm spanner, remove the other electrical cables going to the battery. Disconnect the clip securing the wires to the battery and remove the plastic cover. Using a 10 mm spanner, disconnect the negative connector. Remove the battery securing bracket with a 10 mm spanner and take out the battery. Replace it with a new unit. Refit all components and check the correct reassembly by performing a test start of the engine.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Citroën Berlingo
How to Replace the Battery in a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) To replace the battery in a Citroën Berlingo, open the bonnet to access the components in the engine bay. Here, on the right side, you will find the …
How do you replace the battery of the Citroën Berlingo?
How do you replace the battery of the Citroën Berlingo?
Citroen Berlingo (1996-2013 / MK 1) In order to replace the battery of the Citroën Berlingo, you need to open the hood to access the components located inside the engine compartment: he…
How to change the battery of the Citroen Berlingo II
How to change the battery of the Citroen Berlingo II
Citroen Berlingo (2008-2018 / MK 2) In this video, we will see how to change the battery of the Citroen Berlingo II: we start by opening the front hood, where we will find the battery l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos