Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a Citroen Relay

Model: Citroen Citroen Various
Part: Clock

If you own a 2011 Citroen Relay and want to know how to manually set the time displayed on the vehicle's dashboard, simply follow the instructions below and put them into practice. First, insert the key and start the instrument panel. At this point, press the "Mode" button once and then the up arrow. Press the "Mode" button again, and as soon as the hour digit starts to flash, proceed to change it using the up and down arrows. Repeat the same procedure for the minutes, and finally, press "Mode" one last time to save the changes.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service on the Citroen Relay Van?
How to Reset the Oil Service on the Citroen Relay Van?
Citroen Citroen Various Resetting the oil service on the Citroen Relay van is a very simple and quick operation. First, ensure that all required maintenance tasks have been …
How to replace the clutch on a Citroen Relay - Peugeot Boxer - Fiat Ducato 2.2
How to replace the clutch on a Citroen Relay - Peugeot Boxer - Fiat Ducato 2.2
Citroen Citroen Various Today's main steps will show you how to dismantle and replace the clutch on the Citroen Relay 2.2 HDI, as well as on the Peugeot Boxer and Fiat Ducat…
How to deactivate the start and stop system on the Citroen Relay
How to deactivate the start and stop system on the Citroen Relay
Citroen Citroen Various Disabling the Start&Stop system on a 2021 Citroen Relay diesel vehicle is a very simple and quick operation that can be done with just one step. To d…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos