Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Engine Oil Change Light on Citroen Relay

Model: Citroen Citroen Various
Part: Service warning light

In this brief video tutorial, we will see the procedure to reset the service light, which indicates the remaining life of the engine oil, on a Citroen Relay, produced from 2017 to 2021. First, with the vehicle off, press and hold both the brake and accelerator pedals. Next, turn on the instrument cluster without starting the vehicle. Hold the pedals down for about ten seconds to execute the service light reset. Finally, switch off and restart the vehicle to check the reset.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Citroen Relay
Citroen Citroen Various If the oil change light continues to appear on the dashboard display of your Citroen Relay despite having already changed the oil, you will need to p…
How to Reset the Oil Service on the Citroen Relay Van?
How to Reset the Oil Service on the Citroen Relay Van?
Citroen Citroen Various Resetting the oil service on the Citroen Relay van is a very simple and quick operation. First, ensure that all required maintenance tasks have been …
How to Set the Time on a Citroen Relay
How to Set the Time on a Citroen Relay
Citroen Citroen Various If you own a 2011 Citroen Relay and want to know how to manually set the time displayed on the vehicle's dashboard, simply follow the instructions be…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos