Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Cabin air filter

Video tutorial

In this video tutorial, you can see how to replace the pollen filter on the Citroen Xsara Picasso by following a few simple steps: first, purchase a new pollen filter. Next, get inside the vehicle, turn off the engine, and pull the handbrake.

The filter is located under the front windscreen, so lift the bonnet and secure it with the prop rod. Now that you know where the filter is, unscrew the fastening elements of the filter box cover. Once the cover is removed, take out the old filter; position the new filter according to the arrow on it and reattach the cover by screwing it back in place.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Air Filter on a Citroën Xsara Picasso
How to Remove the Cabin Air Filter on a Citroën Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) How to replace the cabin pollen filter on the Xsara Picasso? This video shows how to perform the disassembly: lift the bonnet, use a lever to remove …
How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
Removing the Fuel Filter on a Citroen Xsara Picasso
Removing the Fuel Filter on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Replace the fuel filter from the Citroen Xsara Picasso vehicle. Lift the car using a column lift; locate the fuel filter as shown in the video. Using…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos