Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. : Mehari

How to Replace the Alternator on a Citroen 2CV Mehari

Model: Citroen Mehari MK 1 - Years 1968-1987
Part: Alternator

To replace the alternator on a Citroen 2CV Mehari, first disconnect the negative terminal of the battery. Then, proceed to remove the protective grille of the fan. Using a 14 mm spanner, loosen the bolt securing the fan pulley. With a sharp blow from a hammer, detach the pulley. At this point, remove the alternator belt cover and the belt itself. Disconnect the positive wire from the alternator and then remove the securing screws. When replacing the alternator, it is advisable to also replace the belt, which will be positioned while mounting the alternator. Refit the large securing bolt without tightening it. Place the belt onto the pulley groove and tension the alternator for tightening. Reattach the fan pulley. For tightening, insert the screwdriver tip into the flywheel teeth. Adjust the belt tension in its housing: an overly tight belt can damage the bearing inside the alternator. Connect the positive wire to the alternator and place the belt protector. Tighten the nuts and check the alignment. Refit the protective grille. Reconnect the negative terminal of the battery.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the alternator belt of the Citroen Mehari
How to replace the alternator belt of the Citroen Mehari
Citroen Mehari (1968-1987 / MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the alternator belt of the Citroen Mehari and the 2CV. First…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos