Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the BSI Unit in the Citroen C4 Picasso?

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Warning light – error code

In this tutorial, see how to reset the BSI unit in the Citroen C4 Picasso, an operation to perform to resolve any management errors of the various devices. First, close all windows and leave the driver's window open, then exit the vehicle, open the bonnet, and remove the key. Wait for 3 minutes, disconnect the battery for 15 seconds, reconnect it, and from the window, activate the side lights. At this point, turn on the instrument cluster, press and hold the door unlock button on the remote for 10 seconds, and check that the reset has been successful.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the BSI Unit of the Citroen C4 Picasso?
How to Reset the BSI Unit of the Citroen C4 Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) The BSI is the main control unit of the vehicle, in this specific case, the Citroen C4 Picasso, responsible for managing all the essential functions …
How do you reset the Citroën C4 Picasso's control unit?
How do you reset the Citroën C4 Picasso's control unit?
Citroen C4 Picasso (2013-2022 / MK 2) To reset the ECU of the Citroën C4 Picasso, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on the dashb…
How do you replace the ECU of the Citroën C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) In order to replace the ECU of the Citroën C4 Picasso, you need to open the hood of the car, so that you can access the components inside the engine …

Other guides you may be interested in

    Frequently Asked Questions

    • C4 Picasso 2013-2022 - What does the engine failure warning light in the instrument cluster of a Citroen C4 Picasso mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos