|
Do it yourself
| |||
| ||||
How to reset the BSI unit of a Citroen C4 Grand Picasso.
Model: Citroen C4 Picasso
MK 2
- Years:
2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
Let's see in this video how to reset the control unit of a Citroen C4 Grand Picasso after disconnecting the battery. First, we need to open the driver's side window, then we will open the hood. Remove the key from the ignition through the window (we won't be able to open the door until the reset is completed) and make sure all the doors are properly closed. Position the key 5 meters away from the vehicle and wait 5 minutes before disconnecting the positive terminal of the battery, then wait twenty seconds. Reconnect the battery terminal and wait three minutes without doing anything, then bring the key back and turn on the lights, again through the window. Insert the key into the ignition and turn on the dashboard. Then turn it off. Now let's lock and unlock the car by pressing the remote buttons. Open the door and start the engine, and check all the functionalities.
Posted on 31 December 2025 by ScegliAuto
Related tutorials
Citroen C4 Picasso
(2013-2022 /
MK 2)
In this tutorial, see how to reset the BSI unit in the Citroen C4 Picasso, an operation to perform to resolve any management errors of the various de…
Citroen C4 Picasso
(2013-2022 /
MK 2)
In the selected tutorial video, there are some practical tips for resetting the ECU of your car, focusing on the Citroen C4 Grand Picasso, but the lo…
Citroen C4 Picasso
(2013-2022 /
MK 2)
The BSI is the main control unit of the vehicle, in this specific case, the Citroen C4 Picasso, responsible for managing all the essential functions …
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.124
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
