Do it yourself
Frequently asked questions about cars and motorcycles

Fuse Diagram of the Cabin of a Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Fuse box

This short yet useful video tutorial shows the diagram of the fuse box in the cabin of a Citroen C4, first generation model produced from 2004 to 2010. These diagrams indicate the name, operating amperage, and the position of each individual fuse and relay present in the fuse box. The box is located under the dashboard on the driver's side, and to access it, you must first remove a small plastic cover situated underneath and to the left of the steering wheel.

Updated on 30 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Citroen C4 (2010-2018 / MK 2) In this video, see the fuse diagram for the Citroen C4 and the location of the respective fuse boxes, useful in case you need to check the status of …
Citroen C4 (2004-2010 / MK 1) In the video tutorial below this article, the fuse diagram of the Citroen C4 1st series is shown. The video displays the fuse diagram, their correct …
Citroen C4 (2004-2010 / MK 1) In this guide we will see the positioning of the fuse boxes and how to find their diagram on the Citroen C4. First of all, we open the hood of the ca…

Other guides you may be interested in

    Frequently Asked Questions

    • C4 2020-2027 - Where is the fuel pump fuse located on the Citroen C4? Read answer
    • C4 2010-2018 - Where is the air conditioning fuse of the Citroà «n C4 located? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos