Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on a 2005 Citroen C4?

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Warning light – error code

In the first model released of the Citroen C4, produced between 2004 and 2010, the service can be reset very quickly. As shown by the author of this video, first locate the button marked "TRIP" located below the display and hold it down. While keeping it pressed, turn the key to switch on the instrument cluster without releasing the button. If you look at the top right of the display, you will see an image of a spanner with numbers counting down to zero: when this countdown ends, the service is reset and you can release the TRIP button and turn off the ignition.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Citroën C4 Service light?
How do you reset the Citroën C4 Service light?
Citroen C4 (2004-2010 / MK 1) To reset the Service light on the Citroën C4, you need to hold down the CHECK button located below the screen in the center of the dashboard. By cont…
How to reset the Service light on the Citroën C4 Cactus?
How to reset the Service light on the Citroën C4 Cactus?
Citroen C4 (2020-2026 / MK 3) Resetting the Service light on the Citroën C4 Cactus is done by pressing the button located at the end of the lever on the left of the steering wheel…
How do you reset the Service light on the Citroën C4?
How do you reset the Service light on the Citroën C4?
Citroen C4 (2004-2010 / MK 1) It will be possible to completely remove the Service light from the instrument panel of the Citroën C4 by holding down the TRIP button located in the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos