|
Do it yourself
| |||
| ||||
How to replace the EGR valve on a Citroen C3 1.4 HDI
Model: Citroen C3
SC
- Years 2009-2016
In this video, we will see how to change the EGR valve on a Citroen C3 1.4 HDI: open the bonnet and disconnect the mass air flow sensor and the electrical connector, then unscrew the air filter, open the air duct, both the upper and lower ones, detach the flexible hose going to the air box and remove the air filter cover, and then the entire air filter box; the EGR valve is right there underneath. It is secured with two screws that can be removed with a 27 screwdriver, but it may still pose some difficulties when removing it. Don't forget to disconnect the electrical connector. Now position the new valve, reconnect the electrical connector, and oil the gasket to improve the seal. Refit the screws and then the air box, reconnect the upper air duct, the flexible hose, and the electrical connector, then the mass air flow sensor, screw the air box back to its support, reconnect the lower air duct, reassemble the air box cover, and secure it with its screws. Job done.
Updated on 3 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Citroen C3
(2009-2016 /
SC)
The step-by-step instructions in this guide will show us how to disassemble and replace the EGR valve of the Citroen C3 1.4 HDI. First, we open the h…
Citroen C3
(2002-2009 /
FC, FN)
In this guide, we will see step-by-step instructions on how to disassemble and replace the EGR valve of the Citroen C3 1.4 HDi. First, let's open the…
Citroen C3
(2009-2016 /
SC)
On the Citroen C3 1.4 HDI, the EGR valve is mounted directly on the intake manifold, on the front side of the engine (timing belt side), and is easil…
Other guides you may be interested in
|
How to Open the Bonnet on the Lancia Y
To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.219
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |