Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Car Tyres

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Tires

Sometimes, the tyres on your car need to be changed. This guide shows you how to do it yourself. Position the jack near the wheel to be replaced and start lifting the car. Use a hex key to remove the bolts. First, remove the wheel rim and then the tyre. Now, you can proceed to replace the tyre by inserting it onto the hub, ensuring it is properly seated. Then, take the various bolts and insert them one at a time, tightening them gradually with the hex key. It is important that, for the wheel to be positioned evenly, the bolts should be tightened not individually but all gradually.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Citroën C3?
How to Reset the Tyre Pressure Warning Light on a Citroën C3?
Citroen C3 (2016-2023 / SY, SX) You can reset the tyre pressure warning light that illuminates on the dashboard of the Citroën C3 by inflating the tyres until they reach the correct…
How to Reset the Tyre Pressure Light on the Citroën C3
How to Reset the Tyre Pressure Light on the Citroën C3
Citroen C3 (2009-2016 / SC) To clear the tyre pressure light from the instrument panel of the Citroën C3, you will need to inflate all four tyres until they reach the correct in…
Resetting the Tyre Pressure Light on Citroen C3
Resetting the Tyre Pressure Light on Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this short video tutorial, learn how to reset the tyre pressure warning light on a third-generation Citroen C3. Before performing the reset proced…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos