Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Citroen Berlingo 2020

Model: Citroen Berlingo MK 3 - Years 2018-2026
Part: Service warning light

In this mini guide for your Citroen Berlingo third series (2020), you will learn how to manually reset the oil light that remains illuminated on the dashboard. First, enter the cabin and insert the key correctly. Next, turn on the ignition and press the button located below the rev counter. Specifically, it is the first button on the left. Wait for about ten seconds, then release the button, and the oil light reset procedure is successfully completed.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Citroen Berlingo
How to Reset the Oil Light on a Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) Resetting the oil light on a Citroen Berlingo is very simple. First, press the right button on the odometer and then turn on the ignition. Next, cont…
How to Turn Off the Service Light in the Citroen Berlingo?
How to Turn Off the Service Light in the Citroen Berlingo?
Citroen Berlingo (2008-2018 / MK 2) For all owners of the Citroen Berlingo, as shown in the video above, let's understand how to reset the service light, which is the automatic reminder…
How to reset the service light on the 2020 Citroen Berlingo
How to reset the service light on the 2020 Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) If you do not know how to properly perform the manual reset of the maintenance alarm light on your Citroen Berlingo (2020 model), do not worry becaus…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos