Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the 2020 Citroen Berlingo

Model: Citroen Berlingo MK 3 - Years 2018-2026
Part: Service warning light

If you do not know how to properly perform the manual reset of the maintenance alarm light on your Citroen Berlingo (2020 model), do not worry because below you will find a description of all the steps you need to follow. First of all, go inside the car and reach the driver's seat. At this point, locate and hold down the button with a picture of a wrench on it and simultaneously insert the key to start the vehicle. Finally, wait for about ten seconds and the reset of the service light is complete.

Posted on 25 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Citroen Berlingo
How to reset the service light on the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) When the service light comes on in a Citroen Berlingo vehicle, it is necessary to first perform the car service and then reset the light. The reset o…
How to reset the service light on the 2015 Citroen Berlingo
How to reset the service light on the 2015 Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) The service light on 2015 Citroen Berlingo vehicles turns on when it is necessary to perform maintenance on the vehicle or when it is necessary to re…
How do you reset the Service light on the Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) It will be possible to reset the Service warning light on the Citroën Berlingo instrument panel by pressing and holding the button located in the cen…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos