Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Service warning light

If the wrench symbol flashes on the instrument cluster display, it's time for maintenance. After changing the oil and filter, reset the service warning light manually, without any diagnostic tool. Locate the TRIP button at the bottom left of the display in the centre of the dashboard, with the ignition off, press and hold this button, then turn on the ignition: the wrench symbol will appear in the top left of the display along with a countdown until the reset is complete.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Citroen C4
How to Reset the Service Light on a Citroen C4
Citroen C4 (2010-2018 / MK 2) To reset the maintenance and oil change light on the vehicle, follow these steps: access the cabin and sit in the driver's seat, locate the display i…
How to Reset the Service Light on the New Citroen C4
How to Reset the Service Light on the New Citroen C4
Citroen C4 (2020-2026 / MK 3) If the service light on the instrument cluster of your new Citroen C4 2022 lights up by mistake, do not worry as you can reset it manually in a few s…
How to Reset the Service Light on a Citroen C4 2021
How to Reset the Service Light on a Citroen C4 2021
Citroen C4 (2020-2026 / MK 3) If you have just serviced your new Citroen C4 but the warning light continues to illuminate steadily at each start, proceed with the following reset …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos