Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter of the Citroen Berlingo

Model: Citroen Berlingo MK 3 - Years 2018-2026
Part: Cabin air filter

To ensure clean air flow in the cabin of the Citroen Berlingo, you need to replace the dedicated filter at the intervals specified in the maintenance schedule. To do this, position yourself in the front passenger seat and detach the two pressure pins that secure the panel under the glove compartment, rotate it downwards and also detach the lower pin to remove the panel. This gives you access to the filter cover, which you will open by sliding it sideways, remove the old filter element and replace it with a new one, paying attention to the direction of the airflow. Close the cover and secure the panel with its pressure pins.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Citroen Berlingo E
How to replace the cabin air filter of the Citroen Berlingo E
Citroen Berlingo (2018-2026 / MK 3) If you want to correctly and safely replace the cabin air filter in your new Citroen Berlingo E, you must carefully read the following guide and foll…
How to replace the cabin air filter of the 2021 Citroen Berlingo
How to replace the cabin air filter of the 2021 Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) In the following guide aimed at those of you who want to replace the cabin air filter of your Citroen Berlingo (year 2021), we will explain the steps…
Replacing the Cabin Filter on a Citroen Berlingo
Replacing the Cabin Filter on a Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) To ensure a constant flow of clean air in the cabin of the Citroen Berlingo, replace the filter at the intervals specified in the manufacturer's main…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos