Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Air Filter in a Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

To replace the engine air filter in a Citroen Berlingo, turn off the engine and open the bonnet. Locate the air filter box in the engine compartment and remove the cover by unscrewing the screws or unclipping the clips holding it in place, depending on the version.

Carefully lift the cover and extract the old filter from its housing. Before installing the new filter, clean the inside of the box to remove any dust or dirt, preventing it from entering the intake duct.

Insert the new filter element, ensuring it is positioned correctly as indicated by the component. Make sure the seal adheres properly along the edge of the box, then reposition the cover and secure it again.

Check that all connections are tight, then close the bonnet and start the engine to verify correct operation.


Posted on 20 August 2026 by ScegliAuto


Related tutorials

Replace the diesel filter on a Citroen Berlingo
Replace the diesel filter on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replacing the diesel filter on a Citroen Berlingo? Let's look at removing the diesel filter in the engine bay. Lift the front bonnet and locate the d…
How to change the engine air filter in a Citroen Berlingo
How to change the engine air filter in a Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) To replace the engine air filter in a Citroen Berlingo, you need to open the bonnet and locate the air filter box, connected to the intake duct in th…
Removing the Diesel Filter on a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Do you want to remove the diesel filter on a Citroen Berlingo? First, lift the bonnet to locate the diesel filter. Disconnect all hoses leading to th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos