Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4
    4. : How to program the key - remote control of the Citroen C4

Citroen C4 - Video tutorial

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Key
Operation: How to program the key - remote control of the Citroen C4

Today we will explain how to program the key/remote control of the Citroen C4. The first step is to insert the key into the ignition, start the engine and then remove it. The second step is to open and close the vehicle from the inside, perform this operation twice. Wait a few seconds and then continue. The third step is to insert the key into the ignition and turn it on for a few seconds, then turn it off and remove the key. With these three steps, your key will have been reprogrammed and will work as before. If this is not the case, contact a workshop before trying again.


Posted on 5 February 2024 by ScegliAuto

    Frequently Asked Questions

    • C4 2020-2027 - How much does a remote control key cost for Citroen C4? Read Answer
    • C4 2010-2018 - Why does the Citroen C4 remote control work but cannot open the doors? Read Answer
    • C4 2020-2027 - What to do when the Citroen C4 remote control does not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos