Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Citroën Berlingo?

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Service warning light

To reset the Service light on the Citroën Berlingo, press and hold the button located on the left side of the instrument panel while it is off. Continue holding the button while inserting the ignition key into the lock and turning it on. Once the panel is powered, you will notice a countdown starting from ten; continue holding the button until the countdown finishes, then release the button and turn off the panel.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Citroën Berlingo?
How to Reset the Service Light on a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To reset the service light on a Citroën Berlingo, turn on the instrument panel and press the button located on the right side of the panel. While hol…
How to reset the service light on the Citroen Berlingo
How to reset the service light on the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) When the service light comes on in a Citroen Berlingo vehicle, it is necessary to first perform the car service and then reset the light. The reset o…
How do you reset the Service light on the Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) It will be possible to reset the Service warning light on the Citroën Berlingo instrument panel by pressing and holding the button located in the cen…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos