Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Service warning light

To reset the maintenance light on a first-generation Citroen Berlingo, insert the key into the ignition and hold down the trip meter reset button on the dashboard. While holding the button, turn the key to the "ON" position without starting the engine. A countdown will appear on the display, starting from a numerical value and counting down to zero. Continue to hold the button until the countdown finishes. When it reaches zero, release the button and turn off the ignition. Turn the ignition back on to check that the maintenance light has been reset correctly and does not appear on the display.

Posted on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Citroen Berlingo 2
How to Reset the Service Light on the Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In this guide for your Citroen Berlingo Mk2 (2008-2018), discover the steps to manually reset the vehicle's service light. First, get inside the car …
How do you reset the Service light on the Citroën Berlingo?
How do you reset the Service light on the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) In order to reset the service light of the Citroën Berlingo, you need to press and hold the button located in the central part of the instrument pane…
How to Reset the Service Light on the 2025 Citroen Berlingo?
How to Reset the Service Light on the 2025 Citroen Berlingo?
Citroen Berlingo (2018-2026 / MK 3) By watching the attached tutorial video, you will see how easy it is to DIY reset the service light on the 2025 Citroen Berlingo. After turning on th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos