Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the BSI unit of the Citroën C5?

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Warning light – error code

To be able to reset the BSI unit on the Citroën C4, it is necessary to connect a diagnostic tool to the corresponding OBD port of the vehicle: this port is located on the dashboard, on the lower left side next to the steering column. Once the scanner is connected, it will be possible to select the specific car model and its corresponding version; this will allow access to the errors stored in the BSI unit, which must all be completely reset. After the reset, the scanner can be disconnected, and it should be verified that everything is functioning properly.

Posted on 28 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 (2010-2018 / MK 2) To reset the BSI unit of the Citroën C5, you will need to connect a diagnostic tool to the OBD port of the vehicle: this port is located on the dashb…
Citroen C4 (2004-2010 / MK 1) The procedure for resetting the BSI control unit on the Citroën C4 involves connecting a diagnostic tool to the OBD port of the vehicle: this is loca…
Citroen C4 (2004-2010 / MK 1) To reset the BSI control unit of the Citroën C4, you will need to connect a diagnostic tool to the OBD port of the vehicle: this will be located on t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos