Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the driver's airbag on the Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Airbag

When the airbag system warning light comes on in a 2018 Citroen Berlingo vehicle, it means that the system is not functioning properly and sometimes it may be necessary to remove it. To remove the driver's airbag, you will need to insert a flat-tipped screwdriver into the bottom part of the steering wheel in order to push the internal lever and release the central body of the steering wheel, where the airbag is located. Once the main body is released, disconnect the connector in order to remove the system completely. To reinsert the body, you will need to connect the connector to the central body and insert the body back into the steering wheel.

Posted on 28 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the airbag of the 2010 Berlingo
How to disassemble the airbag of the 2010 Berlingo
Citroen Berlingo (1996-2013 / MK 1) In the following article, we will see how to disassemble the airbag of the 2010 Citroen Berlingo. For this operation, we will need a flathead screwdr…
How do you remove the steering wheel airbag in the Citroen Berlingo?
How do you remove the steering wheel airbag in the Citroen Berlingo?
Citroen Berlingo (2008-2018 / MK 2) This video guide is very useful for those who decide to disassemble the steering wheel airbag of a Citroen Berlingo themselves. As you can see, the s…
How to disassemble the airbag and steering wheel of the Citroen Berlingo
How to disassemble the airbag and steering wheel of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today we will explain how to remove the airbag and steering wheel from a Citroen Berlingo vehicle. To perform this operation, we need to use a flat-t…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos