Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the injectors of the Citroen C2 1.4

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Fuel injectors

Today we will see the process of disassembly and replacement of the gasoline injectors of the Citroen C2 with a 1.4 engine, but also on the 1.1 engine. First of all, we open the hood of the car and start removing the tubing that we find on the top; disconnect the injector tubing and unscrew the screws at the base to remove the rail, as shown in the video. At this point, we disassemble the four injectors one by one, replacing them if necessary with new ones; we reassemble the injectors and, if necessary, carry out the coding, following the video tutorial until the end!

Posted on 29 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses on the Citroën C2?
Where Are the Fuses on the Citroën C2?
Citroen C2 (2003-2010 / MK 1) All the fuses on the Citroën C2 are located inside the designated fuse boxes installed in the vehicle. In this type of vehicle, you will find two box…
How to Replace the Radio in a Citroen C2
Citroen C2 (2003-2010 / MK 1) In today's tutorial video, you will learn how to remove and replace the standard radio in a Citroen C2, following the instructions below. First, get …
How to reset the oil light on the Citroen C2
How to reset the oil light on the Citroen C2
Citroen C2 (2003-2010 / MK 1) Performing the reset of the service light on a Citroen C2 follows the same steps as resetting the same cutting light on a Citroen C3 vehicle. The ste…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos